Setup HP Deskjet 2542 Printer Wirelessly

Want to Know About How to Setup HP Deskjet 2542 Printer Wirelessly on Mac or iPhone? Several methods can set up the Wi-Fi connection for the HP Deskjet 2542 printer. The Wi-Fi-protected setup method enables easily connecting the printer to a network. You need to use the WPS push method or the PIN method to allow the WPS to set up. You can refer to the below sections to set up your hp Deskjet 2542 printer.

The best and easy way to Setup HP Deskjet 2542 Printer Wirelessly. Call 1-800-673-8163 to speak to an HP printer expert to get your printer serviced. Contact HP Technical Support Now!


Setup HP Deskjet 2542 Printer Wirelessly


Connecting HP DeskJet 2542 Printer To Wi-Fi

You can try the given steps to connect your HP Deskjet 2542 Printer To Wi-Fi and set it up. Read the instructions carefully first:

  • You need to first power on the HP Deskjet 2542 printer and then check if the printer driver installed on the PC is updated.
  • Next, you have to connect the PC to the wireless network to which you wish to connect the printer.
  • Then select the wireless button on the printer’s control panel and open the wireless settings menu for HP Deskjet 2542 Wireless Setup.
  • Then you need to select the Wi-Fi-protected setup followed by the push-button options. Next, you have to locate the WPS button on the router and press it when you receive the prompt from the printer.
  • Now, open the wireless settings menu on the printer’s control panel. Then select the Wi-Fi-protected setup and choose the PIN option.
  • You need to note down the PIN that showed up on the printer’s control panel and then type it on the wireless router.

Using the above steps, you will know all the proper steps to hp Deskjet 2542 wireless setup. Follow the steps, and you are all set.

HP Deskjet 2542 Printer Wireless Setup In Mac

You can set up the HP Deskjet printer on a wireless network with the help of the instructions given below. Then you have to use the on-screen instructions and simplify the wireless network connection process. Below, you will know how to connect hp Deskjet 2542 to wifi on mac.

Power On Settings In HP-Deskjet 2542 Printer

Follow these steps to power on the settings on HP Deskjet 2542 Printer:

  • First, you need to turn on the printer device using the printer’s power button. After that, you have to place the ink cartridges and then load the paper into the input tray.
  • Now, you are ready to connect the power cords and complete the entire hardware setup for the proper functioning of the HP Deskjet 2542 Printer.

This is how you can power on the settings on the HP Deskjet 2542 Printer. To restore the default settings in the HP Deskjet printer, you can refer to the below section.

Restoring Default Settings In HP Deskjet 2542 Printer

Use the below settings to restore it in HP Deskjet 2542 Printer. Follow the steps carefully for that:

  • First, you need to use the power button and turn on the HP Deskjet 2542 printer device. You need to skip to the next steps to carry on the software installation.
  • The wireless light blink is essential, so you have to repeat the steps until the wireless light blinks.
  • Within two hours, you have to complete the software using the HP Auto wireless connect feature.

Following these steps, you will know how to restore the HP Deskjet 2542 Printer settings and hp Deskjet 2542 connect to the wifi process.

HP Deskjet 2542 Printer Setup On Mac

Most of the MacOS and IOS support the AirPrint. To start the process, you have to connect the HP Deskjet 2542 printer to the network. For that, you are required to follow the below steps and get the HP Deskjet 2542 Connect to Wifi Mac.

  • Start with first connecting the HP Deskjet 2542 printer to the Wi-Fi network, same as that of the MAC PC. Now, you are required to press and hold the wireless button on the printer until you see the wireless light begins to blink.
  • Then you need to connect the USB cable to the rear of the printer port and the USB port on the PC. Next, you have to open the document or photo that you wish to print.
  • Then you need to click the file and click print.
  • Now, you have to click the printer name in the available printer name list. If you do not find your printer name, then search it under the nearby printers heading.

Follow the steps given above in this section, and you will know how to get the hp Deskjet 2542 connect to wifi mac.

How To Connect HP Deskjet 2542 Printer To Wi-Fi On iPhone?

You can use the hp Deskjet 2542 manual for all the setup processes and guidelines. However, here we are, giving you the steps to connect your HP Deskjet 2542 Printer to Wi-Fi on iPhone:

  • First, you need to turn on Wi-Fi on the iPhone and connect it to the local network.
  • Tap the wireless and information icons or the wireless and start black copy buttons at the same time.
  • Then wait till the printer produces the wireless test report and verify if the printing machine is connected to the wireless network.
  • Now, verify if the printing machine is connected to the wireless network, press the wireless, and cancel the buttons simultaneously so that the power light flashes.
  • Then wait until the wireless light flashes and press the WPS button on your ISP-provided machine within 2 hours of the light flashes before initiating the connection process.
Using the above steps, you will know how to Connect HP Deskjet 2540 to iPhone. Read and follow the instructions carefully.